Headed Concrete Anchor - Arc Weld Stud
| For a quote or to order, please specify: | |||
|---|---|---|---|
| Product Code: | Diameter: | Length: | Material: |
| HCA | Specify D | Specify L | Specify |
Stud Welding Equipment and Supplies Request a quote
| For a quote or to order, please specify: | |||
|---|---|---|---|
| Product Code: | Diameter: | Length: | Material: |
| HCA | Specify D | Specify L | Specify |
Headed Concrete Anchors are used in all types of concrete connections. They can be welded to a flat surface, inside of an angle or outside of an angle.
Specifications – HCA’s meet AWS Specifications D1.1, D1.5 and or D1.6. International Specifications BS5950, BS5400, DIN/ISO are available.
Material – Low carbon steel, ASTM A108 / A29, Grade C1010 to C1020. In Stainless Steel, grades 302, 304, 310 and 316 are stocked in some sizes.
Ferrules – Customer to specify ferrule type at time of order.
Length – Lengths are listed before welding. For Stud Diameters (D) 1/2" and smaller the length reduction is roughly 1/8" and for (D) 5/8" the reduction is roughly 3/16". HCA’s can be made in any length above the standard minimum.
| STUD | FERRULE | |||||||
|---|---|---|---|---|---|---|---|---|
| D | MIN L | H | A | PART NUMBER | D | B | G | M |
| 1/4 | .750 | .500 | .187 | F025-F | .455 | .380 | .234 | .390 |
| 3/8 | .750 | .750 | .281 | F037-F | .640 | .505 | .234 | .390 |
| 1/2 | 1 | 1 | .281 | F050-F | .795 | .650 | .250 | .428 |
| 5/8 | 1 | 1.250 | .312 | F062-F | 1.030 | .785 | .328 | .516 |
| MECHANICAL PROPERTIES | ||
|---|---|---|
| Type A | Type B | |
| Tensile Strength | 61,000 psi min. | 65,000 psi min. |
| Yield Strength | 49,000 psi min. | 51,000 psi min. |
| Elongation (% in 2 in.) | 17% min. | 20% min. |
| Elongation (% in 5x dia.) | 14% min | 15% min. |
| Reduction of Area | 50% min. | 50% min. |
| Type A Studs are general purpose studs. | ||
| Type B Studs are headed, bent, or of other configuration that are used as an essential component in composite beam design and construction. | ||
Headed Concrete Anchors are available for welding to flat surfaces, inside angles, and outside angles. Each of these applications requires the proper style stud and ferrule, so please specify your application when ordering.