Skip to main content
Sunbelt Stud Welding
1-800-462-9353
www.sunbeltstudwelding.com

Arc Stud Welder - Visar 1200 HBS

Arc Stud Welder - HBS Visar 1200

Description / Features

  • Drawn arc stud welding
  • Short cycle stud welding
  • All-rounder for workshops and construction sites – whether with shielding gas or with ceramic ferrule
  • Compact lightweight unit with power: 1,200 A but just 20.5 kg
  • Extremely wide current setting range from 25 to 1,200 A
  • USB port for saving and loading welding programs
  • Comprehensive customer-specific setting options as well as detailed process optimization and control
Mild steel
Stainless steel
Aluminum (w/gas #4 to 3/8")
M3 to M10 - #4 to 5/8"
SPECIFICATIONS
Welding process ARC, Short ARC, Inert Gas (for s/c and aluminum
TechnologyInverter
EquipmentWelding with ceramic ferrule
Welding with shielding gas
Process control
DisplayDigital
Welding rangeM3 to M16, dia. 2 to 16 mm
#4 to 5/8", dia. 14 ga to 9/16"
Welding rate
(Duty cycle *)
25 °C100%50%35%
F [studs/min]111621
t [ms]600600600
I* [A]120012001200
U* [V]303030
* The term "duty cycle" refers to the ratio of welding duration to work pause of a stud welding unit. It describes the uninterrupted operating time of a unit over a period of 10 minutes. The largest possible studs are used in the test.
100% duty cycle=10 min. of continuous welding, no shutdown due to over temperature.
50% duty cycle=5 min. of welding followed by 5 min. pause.
35% duty cycle=3.5 min. of welding followed by 6.5 min. pause.
Welding current1 200 A (max.) at 50 V
Current adjustment range25 to 1 200 A (stepless)
Welding time5 to 1 500 ms (stepless)
Primary power200 to 600 V, 3 phases, 50/60 Hz
Cooling typeF (temperature controlled cooling fan)
IP CodeIP 43
Dimension LxWxH
(without handle)
472.5 x 355 x 358 mm /
18.60" x 13.98" x 14.09"
Weight20.5 kg / 45 lbs
Suitable gunsSee below
Order No.93-66-0120 - USA
93-40-020 - Ground cable, 5 m, 25 mm2, 2x 10" vice grip
88-24-466 - Tool bag - (Accessories and welding gun are not included)

Stud Welding Guns

Stud Welding Gun - A 16
A 16
Dia. 3 to 16 mm - dia. #4 to 5/8"
  • All-rounder for construction sites
  • Robust gun with plunge dampener and length compensation
  • Level on rear of gun to line studs level
Stud Welding Gun - A 12 with gas shroud PSS-1/SC
A 12 with gas shroud PSS-1/SC
M3 to M8 (M10) - #4 to 5/16" (7/16")
  • Small gun with easy set-up for SC welding
  • Length compensation (stable welding results)
Stud Welding Gun - A 12 with shielding gas leg assembly PSS-2
A 12 with shielding gas leg assembly PSS-2
M3 to M12 - #4 to 1/2"
  • Compact gun with easy set-up
  • Length compensation (stable welding results)
Stud Welding Gun - A 12-FL
A 12-FL
M3 to M12 - #4 to 1/2"
  • Simple set-up of the gun without length compensation
Stud Welding Gun - A 12 with ceramic leg assembly PSC-1
A 12 with ceramic leg assembly PSC-1
M3 to M12 - #4 to 1/2"
  • Compact gun with easy set-up
  • Length compensation (stable welding results)