Arc Stud Welder - Arc-800

Application
- Especially suitable for thicker sheets of about 2 mm or higher
Features
- Drawn arc with ceramic ferrule (ARC)
- Drawn arc with shielding gas (ARC)
- Short-cycle (SC)
- Modern technology with extremely wide welding range
- For welding with ceramic ferrules or with inert gas
- Operating by membrane keyboard and display panel
- Digital display of welding time in msec.
- Inert gas module standard
- Option automatic mode
- Thermally controlled fan
- Guided cooling air flow to the transformer to protect electronic components from being polluted
- Emergency circuit to cut off the complete unit in case of defective power circuit
- Integrated mains filter protects uniform voltage peaks and spikes
- Galvanic separation of control and welding cables provide reliable operation
- Sturdy metal housings; small dimensions and low weight
- Depending on mains fuse, configuration also for 16 amps primary power supply possible
Mild steel
Stainless steel
M3 to M12 - #4 to 1/2"
| SPECIFICATIONS | |
|---|---|
| Welding range | M3 to M12 (type RD), dia. 2 to 10 mm #4 to 1/2" (type RD), dia. 14 ga to 3/8" |
| Welding rate | 7 to 17 studs/min (depending on application and stud dia.) |
| Welding current | 800 A |
| Welding time | 5 to 1 000 ms (stepless) |
| Primary power | 400 V*, 3 phases, 50/60 Hz, 35 AT (slow blow) *alternative primary power see, Order No. |
| Primary plug | 32 A (at 400 V mains) |
| Connected load | I 1max = 31A |
| Cooling type | F (temperature controlled cooling fan) |
| IP code | IP 23 |
| Dimension LxWxH (without handle) | 470 x 230 x 220 mm 18.50" x 9.06" x 8.66" |
| Weight | 40 kg / 88.185 lbs |
| Suitable guns | See below |
| Order number | 93-10-0702A (400 V) 93-16-0702A (230/460 V) 93-15-0702A (575 V) |
Stud Welding Guns
CA 08 with gas shroud PSS-1/SC
M3 to M8 (M10) (for SC) #4 to 5/16" (7/16") (for SC)
- Entry-level version used for SC welding without length compensation
A 12 with ceramic leg assembly PSC-1
M3 to M12 - #4 to 1/2"
- Compact gun with easy set-up
- Length compensation (stable welding results)
A 12 with gas shroud PSS-1/SC
M3 to M8 (M10) - #4 to 5/16" (7/16")
- Small gun with easy set-up for SC welding
- Length compensation (stable welding results)
A 12 with shielding gas leg assembly PSS-2
M3 to M12 - #4 to 1/2"
- Compact gun with easy set-up
- Length compensation (stable welding results)
A 16
Dia. 3 to 16 mm - dia. #4 to 5/8"
- All-rounder for construction sites
- Robust gun with plunge dampener and length compensation
- Level on rear of gun to line studs level






