Download PDF
Request a QuoteDeformed Bar Concrete Anchor - Arc Weld Stud
Deformed Bar Anchors are designed for weld and bearing plates in concrete connections.
Specifications: – DBA’s meet AWS Specifications D1.1.
Material: – Low carbon steel, ASTM A496
Length: – Lengths are listed before welding.
For Stud Diameters (D) 1/2" and smaller the length reduction is roughly 1/8" and for (D) 5/8" and 3/4" the reduction is roughly 3/16".
DBA's can be made in any length above the standard minimum.
| For a quote or to order, please specify: | ||||
|---|---|---|---|---|
| Product Code: | Diameter: | Length: | Material: | Quantity: |
| DBA | Specify D | Specify L | Specify | Specify |
| Stud Specifications | Ferrule Specifications | |||||
|---|---|---|---|---|---|---|
| D | L | No. | D | B | G | M |
| 3/8 | See below for standard lengths by DBA diameter. | F037-F | .640 | .505 | .234 | .390 |
| 1/2 | F050-F | .795 | .650 | .250 | .438 | |
| 5/8 | F062-F | 1.030 | .785 | .328 | .516 | |
| 3/4 | F075-F | 1.218 | 1.030 | .469 | .656 | |
| MECHANICAL PROPERTIES | MILD STEEL | |
|---|---|---|
| C - 0.23% max. | P - 0.04% max. | |
| Mn - 0.90% max. | S - 0.05% max. | |
| Mechanical Property Requirements | |
|---|---|
| Type C | |
| Tensile Strength | 80,000 psi min. (552 MPa) |
| Yield Strength (0.5% offset) | 70,000 psi min. (485 MPa) |
| Type C Studs are cold-worked deformed steel bars manufactured in accordance with specification ASTM A496 having a nominal diameter equivalent to the diameter of a plain wire; having the same weight per foot as the deformed wire. ASTM A496 specifies a maximum diameter of 0.628 in. (16mm). Any bar supplied above that diameter must have the same physical characteristics regarding deformations as required by ASTM A496. | |
| Deformed Bar Anchor - Accessory Detail | ||||||
|---|---|---|---|---|---|---|
| Stud Diameter | Chuck P/N | Ferrule Type | Ferrule P/N | Foot P/N | Grip P/N | Ferrule Foot Plate P/N (Dual Leg) |
| 1/4 | CN-025 | Flat | F025-F | B-1C | GC-025 | QN-025 |
| Low Profile | F025-LP | B-1C | GC-025 | QN-025 | ||
| Heavy Duty | F025-HD | B-1C | GC-037 | QN-037 | ||
| Inside Angle | F025-IA | B-1C | GD-025 | N/A | ||
| Outside Angle | F025-OA | B-1C | GC-025 | QN-025 | ||
| 3/8 | CN-037 | Flat | F037-F | B-1C | GC-037 | QN-037 |
| Low Profile | F037-LP | B-1C | GC-037 | QN-037 | ||
| Heavy Duty | F037-HD | B-1C | GC-050 | QN-050 | ||
| Inside Angle | F037-IA | B-1C | GD-037 | N/A | ||
| Outside Angle | F037-OA | B-1C | GC-037 | QN-037 | ||
| 1/2 | CN-050 | Flat | F050-F | B-1C | GC-050 | QN-050 |
| Low Profile | F050-LP | B-1C | GC-050 | QN-050 | ||
| Vertical | F050-V | B-1C | GC-050 | QN-050 | ||
| Heavy Duty | F050-HD | B-2C | GC-062 | QN-062 | ||
| Inside Angle | F050-IA25 | B-1C | GD-050 | N/A | ||
| Inside Angle | F050-IA37 | B-1C | GD-050 | N/A | ||
| Outside Angle | F050-OA | B-1C | GC-050 | QN-050 | ||
| 5/8 | CN-062 | Flat | F062-F | B-2C | GC-062 | QN-062 |
| Low Profile | F062-LP | B-2C | GC-062 | QN-062 | ||
| Vertical | F062-V | B-2C | GC-062 | QN-062 | ||
| Heavy Duty | F062-HD | B-2C | GC-075 | QN-075 | ||
| Inside Angle | F062-IA25 | B-2C | GD-062 | N/A | ||
| Inside Angle | F062-IA37 | B-2C | GD-062 | N/A | ||
| Outside Angle | F062-OA | B-2C | GC-062 | QN-062 | ||
| 3/4 | CN-075 | Flat | F075-F | B-2C | GC-075 | QN-075 |
| Low Profile | F075-LP | B-2C | GC-075 | QN-075 | ||
| Vertical | F075-V | B-2C | GC-075 | QN-075 | ||
| Inside Angle | F075-IA37 | B-2C | GD-075 | N/A | ||
| Inside Angle | F075-IA50 | B-2C | GD-075 | N/A | ||
| Outside Angle | F075-OA | B-2C | GC-075 | QN-075 | ||
| Specifications | Packaging Detail | Weights - in pounds | ||||||
|---|---|---|---|---|---|---|---|---|
| Diameter | Length | SSW Part Number (mild steel) | Pieces Per Box | Boxes Per Pallet | Pieces Per Pallet | Box Weight | Pallet Weight | 1,000 Pcs. Weight |
| D | L | |||||||
| 3/8 | 10 - 1/8 | DBA0371012 | 150 | 18 | 2,700 | 46 | 828 | 307 |
| 12 - 1/8 | DBA0371212 | 150 | 18 | 2,700 | 55 | 990 | 367 | |
| 18 - 1/8 | DBA0371812 | 150 | 12 | 1,800 | 80 | 960 | 533 | |
| 24 - 1/8 | DBA0372412 | 150 | 8 | 1,200 | 108 | 864 | 720 | |
| 30 - 1/8 | DBA0373012 | 150 | 7 | 1,050 | 130 | 910 | 867 | |
| 36 - 1/8 | DBA0373612 | 150 | 6 | 900 | 156 | 936 | 1,040 | |
| 48 - 1/8 | DBA0374812 | 150 | 6 | 900 | 208 | 1,248 | 1,387 | |
| 1/2 | 8 - 1/8 | DBA0500812 | 100 | 18 | 1,800 | 44 | 792 | 440 |
| 10 - 1/8 | DBA0501012 | 100 | 18 | 1,800 | 54 | 972 | 540 | |
| 12 - 1/8 | DBA0501212 | 100 | 18 | 1,800 | 67 | 1,206 | 670 | |
| 18 - 1/8 | DBA0501812 | 100 | 12 | 1,200 | 98 | 1,176 | 980 | |
| 24 - 1/8 | DBA0502412 | 100 | 8 | 800 | 128 | 1,024 | 1,280 | |
| 30 - 1/8 | DBA0503012 | 100 | 7 | 700 | 160 | 1,120 | 1,600 | |
| 36 - 1/8 | DBA0503612 | 100 | 6 | 600 | 192 | 1,152 | 1,920 | |
| 42 - 1/8 | DBA0504212 | 100 | 6 | 600 | 222 | 1,332 | 2,220 | |
| 48 - 1/8 | DBA0504812 | 100 | 6 | 600 | 256 | 1,536 | 2,560 | |
| 60 - 1/8 | DBA0506012 | 100 | 1 | 100 | 314 | 314 | 3,140 | |
| 5/8 | 12 - 3/16 | DBA0621218 | 50 | 18 | 900 | 51 | 918 | 1,020 |
| 18 - 3/16 | DBA0621818 | 50 | 12 | 600 | 76 | 912 | 1,520 | |
| 24 - 3/16 | DBA0622418 | 50 | 8 | 400 | 102 | 816 | 2,040 | |
| 30 - 3/16 | DBA0623018 | 50 | 7 | 350 | 126 | 882 | 2,520 | |
| 36 - 3/16 | DBA0623618 | 50 | 6 | 300 | 151 | 906 | 3,020 | |
| 42 - 3/16 | DBA0624218 | 50 | 8 | 400 | 176 | 1,408 | 3,520 | |
| 48 - 3/16 | DBA0624818 | 50 | 6 | 300 | 197 | 1,182 | 3,940 | |
| 3/4 | 12 - 3/16 | DBA0751218 | 40 | 18 | 720 | 60 | 1,080 | 1,500 |
| 18 - 3/16 | DBA0751818 | 40 | 12 | 480 | 87 | 1,044 | 2,175 | |
| 24 - 3/16 | DBA0752418 | 40 | 8 | 320 | 115 | 920 | 2,875 | |
| 30 - 3/16 | DBA0753018 | 40 | 6 | 240 | 142 | 852 | 3,550 | |
| 36 - 3/16 | DBA0753618 | 40 | 6 | 240 | 175 | 1,050 | 4,375 | |
| 42 - 3/16 | DBA0754218 | 40 | 6 | 240 | 205 | 1,230 | 5,125 | |
| 48 - 3/16 | DBA0754818 | 40 | 6 | 240 | 226 | 1,356 | 5,650 | |
| For non standard sizes contact Sunbelt Stud Welding. | ||||||||