Skip to main content
Sunbelt Stud Welding

Sunbelt Stud Welding
1-800-462-9353

Stud Welding Equipment and Supplies
Sunbelt Stud Welding
1-800-462-9353
www.sunbeltstudwelding.com

Capacitor Discharge (CD) - Battery Stud Welder - Pegasar 500 accu insulation

Battery Power or AC - 110 VoltsBATTERY OR 110 VOLT POWERBattery Power or AC - 110 Volts

Mobile, light and robust battery powered for constructionsites (IP 44)

Intuitive, simple to operate thanks to quick-accessbuttons and pre-stored parameters

Capacitor Discharge (CD) Stud Welder - Battery Power Pegasar 500 accu insulation

POWER UNIT W/BATTERY AND BUILT IN CHARGER

Capacitor Discharge (CD) Stud Welder - Battery Power Pegasar 500 accu insulation - Battery and Charger

OPTIONAL EXTRA BATTERY - OPTIONAL STAND ALONE CHARGER

DESCRIPTION / FEATURES

Mobile

  • Self-sufficient, no power connection required
  • Ready to go
  • Up to 400 welds M6 with a single battery charge
  • Work without interruption with an optional spare battery
  • Light weight (12 kg included battery)

Simple

  • Intuitive operation
  • Handy toolbag (optional)
  • Cable tidy system provided via the handle
  • Quick battery replacement

Robust

  • Enclosed housing (no air vents)
  • Protection against dirt, water, dust, knocks
  • Protection class IP 44
  • Side panels provide a raised base
  • Solid base

Safe

  • Increased protection (safety extra low voltage under battery operation)
  • Weld in environments with increased exposure to electrical hazards
  • Quick access buttons for fast setup
  • Consistent welding energy
Mild steel
Stainless steel
Aluminium
M3 to M6 - #4 to 1/4"
SPECIFICATIONS
Welding rangeCupped head pins dia. 2 and 2.7 mm
CD ISO nails dia. 2 and 3 mm
Welding rateCupped head pin: dia. 2.7 mm=20 pins/min (Charging voltage 85 V)
CD ISO nail: dia. 3 mm=20 nails/min (Charging voltage 90 V)
Count of weldings per battery400 welds (cupped head pin dia. 2.7 mm)
Capacitance100,000 μF
Welding time1 to 3 ms
Energy500 Ws
Charging voltage50 to 100 V (stepless voltage regulation)
Power sourceCapacitor
Battery25.55 V / 5.7 Ah / 145.64 Wh (LiNiCoAlO2)
Battery charging timeMax. 2.5 h
Battery lifeAt least 400 charging cycles (at 800 charging cycles still approx. 60 % of the initial capacity)
Dimension LxWxH475 x 300 x 355 mm / 18.70” x 11.81” x 13.98” (with handle)
Weight12 kg / 26.46 lbs incl. battery, 10.7 kg / 23.59 lbs without battery
Primary power100 V to 240 V, 50/60 Hz, 10 AT (slow blow); in battery operation: 25.55 V
Connected load500 W
Cooling typeF (temperature controlled cooling fan)
IPWith inserted battery: IP 44, without battery: IP 23
Suitable gunsSee below
Order No.92-10-0500 (Plug E+F; Europe + China), diameter buttons "metric"
92-12-0500 (Plug B; USA + Canada), diameter buttons "imperial"
92-13-0500 (Plug B; Japan), diameter buttons "metric"
PARTS LIST
DescriptionPart Number
Pegasar 500 accu Insulation - (Plug E+F; Europe + China), diameter buttons "metric"92-10-0500
Pegasar 500 accu Insulation - (Plug B; USA + Canada), diameter buttons "imperial"92-12-0500
Pegasar 500 accu Insulation - (Plug B; Japan), diameter buttons "metric"92-13-0500
Ground cable for cupped head pins; CI 0392-40-091
Ground cable for CD ISO nails; C 06-392-40-154
Accu 150 - battery; Lithium-Ion-battery88-23-484
ACCU CHARGER 150 - charging unit for battery type Accu 150 - Plug E+F88-23-661
ACCU CHARGER 150 - charging unit for battery type Accu 150 - Plug B88-24-066
Toolbag88-24-466

STUD WELDING GUNS

Stud Welding Gun - CI 03

CI 03

Cupped head pins - Dia. 2/2.7 mm / 14 ga/12 ga

  • Especially suitable for welding on cupped head pins (HVAC)

More information »

C 06-3 with foot ring

C 06-3 with foot ring

M3 to M6 - #4 to 1/4"

  • Universal design for use on flat surfaces
  • Easy handling
  • No setting for lift and spring pressure
  • Aluminium to M4 (#8)

More information »

C 06-3 with centering tube PPR-2

C 06-3 with centering tube PPR-2

M3 to M6 - #4 to 1/4"

  • Used for welding with templates and for protection against spatter
  • Easy handling
  • No setting for lift and spring pressure
  • Aluminium to M4 (#8)

More information »