Arc Stud Welder - Arc 3000
The Arc 3000 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units.
An added feature in the Arc 3000 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters.
A specially designed electronic gun control circuit has been incorporated into the system. If a fault condition occurs due to a shorted gun solenoid or a faulty control cable, the circuit will prevent gun retriggering and eliminate damage to printed circuit boards. This system is capable of welding studs from 1/4" diameter to 1-1/4" diameter with preciseness and repeatability.
|DIMENSIONS||36" H x 28" W x 40" D|
|OUTPUT||3000 AMPS @ 44 VDC|
|DUTY CYCLE||(1/4 – 3/8: Unlimited) (1/2": 60/Min) (5/8": 30/Min) (3/4": 20/Min) (7/8": 15/Min) (1": 10/Min)|
|INPUT||230/460/575 VAC 3 Phase 60 Cycle|
|FUSING||400/200/180 Delay Type|
|TIME CONTROL||STEPLESS ADJUSTABLE: .1 - 1.8 sec.|
|CURRENT CONTROL||STEPLESS ADJUSTABLE: 400 - 3000 amp|
|GROUND CABLE: 25 FT. x 4/0||125-0110|
|COMBO CABLE: 50 FT. x 4/0||125-1002|