ARC Stud Welder - ARC 1850
The ARC-1850 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. Stick welding and Arc air gouging processes are available only as an option.
An added feature in the ARC-1850 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters.
A specially designed electronic gun control circuit has been incorporated into the system. If a fault condition occurs due to a shorted gun solenoid or a faulty control cable, the circuit will prevent gun retriggering and eliminate damage to printed circuit boards.
|DIMENSIONS||26" H x 24" W x 33" D|
|OUTPUT||1850 AMPS @ 45 VDC|
|DUTY CYCLE||(12 GA - 5/8" Unlimited) (3/4" 10/Min.) (7/8" 4/Min.)|
|INPUT||230/460/575 VAC 3 Phase 60 Hz|
|FUSING||200/100/90 Delay Type|
|TIME CONTROL||STEPLESS ADJUSTABLE: .1 - 1.6 sec.|
|CURRENT CONTROL||STEPLESS ADJUSTABLE: 100 - 1900 amp|
|GROUND CABLE: 25 FT. x 4/0||125-0104|
|COMBO CABLE: 50 FT. x 4/0||125-1002|