Tapped Reduced Base - Arc Weld Stud
For a quote or to order, please specify: | |||||
---|---|---|---|---|---|
Product Code: | Base Diameter: | Base Length: | Thread Diameter: | Thread Length: | Material: |
ARC TAPRB | Specify BD | Specify BL | Specify TD | Specify TL | Specify |
For a quote or to order, please specify: | |||||
---|---|---|---|---|---|
Product Code: | Base Diameter: | Base Length: | Thread Diameter: | Thread Length: | Material: |
ARC TAPRB | Specify BD | Specify BL | Specify TD | Specify TL | Specify |
STUD | ||||||
---|---|---|---|---|---|---|
D | MIN L | TD | TL* | BD | BL | FERRULE CODE |
3/8 | 1-1/2 | 1/4-20 | 3/8 | .250 | 7/16 | FS250 |
1/2 | 1-1/2 | 3/8-16 | 9/16 | .375 | 7/16 | FS375 |
5/8 | 1-1/2 | 7/16-14 | 21/32 | .500 | 1/2 | FS500 |
3/4 | 1-1/2 | 1/2-13 | 3/4 | .500 | 1/2 | FS500 |
7/8 | 2 | 5/8-11 | 15/16 | .625 | 5/8 | FS625 |
1" | 2-1/2 | 3/4-10 | 1" | .750 | 5/8 | FS750 |
* Maximum standard tap depth equals 1-1/2 times tap diameter.TAPS: Standard tap is UNC-2B, other taps are available. |
MATERIAL | MILD STEEL | STAINLESS STEEL | |
---|---|---|---|
C - 0.23% max. | P - 0.04% max. | AISI grade - 302/304/305/316 std. | |
Mn - 0.90% max. | S - 0.05% max. | Other grades available upon request. | |
MECHANICAL PROPERTIES | Tensile | 75,000 psi (min.) | Values for various grades available upon request. |
Yield | 64,000 psi (min.) | ||
Elongation | 20% (in 2 inches) | ||
PLATING | Plating is not standard. Cadmium, Copper, Nickel, and Zinc available upon customer request. | Does not apply to Stainless. |