Sunbelt Stud Welding

Sunbelt Stud Welding
1-800-462-9353

Stud Welding Equipment and Supplies
Sunbelt Stud Welding
1-800-462-9353
www.sunbeltstudwelding.com

New Line of CD Stud Welders from Houston Stud Welding Supplier

Sunbelt Stud Welding now offers four new, compact capacitor discharge stud welding units. The full CD stud welding system includes the power unit, welding gun, and the ground cable, but all items can be sold separately. Order by phone with our toll free line, 1-800-462-9353, or call our office at 713-939-8903 to speak to one of our experts.

New CD Stud Welders

Revolutionize your CD stud welding experience with our new stud welding units. All four new CD stud welders can weld aluminum, steel (unalloyed and alloyed), brass, and weldable special alloys. Charging voltage is adjustable from 60-200 Volts and is displayed on a digital display. An LED display is used for all important functions. Charging is not affected by variations in the supply’s voltage, allowing for short charging time and quick, repeated welding sequences. Integrated safety switching ensures your well-being during those tricky stud welds. The LBS 44, LBS 75, LBS 90, and LBS 130 all have a sturdy metal casing and powder-coated front-plates, which allows for clear and durable labeling and provide long-term protection.

Charging voltage is adjustable from 60-200 Volts and is displayed on a digital display. Charging is not affected by variations in the supply’s voltage, thus allowing for short charging time and quick, repeated welding sequences.

LBS 44 - Weighing in at 22 lbs, the LBS 44 is one of the lightest CD stud welders around. The electronically clocked inverter charging board allows for the capacitors’ charge to hold for many welds. Despite its small size (8x16x10.5”), the LBS 44 has a capacitance charge of 44,000 mtd and consistently delivers high-power welds. Welding up to 25 studs per minute, the LBS 44 can install studs whose diameter ranges from 14 GA to ¼”.

LBS 75 – This CD stud welder is slightly heavier (24 lbs) than the LBS 44, but has a capacitance charge of 66,000 mfd. This powerful, portable CD stud welding unit can install studs ranging from 14 GA to ¼” in diameter and can weld up to 25 studs per minute.

LBS 90 – With a capacitance charge of 88,000 mfd, the LBS 90 can weld up to 40 studs per minute! This CD stud welding system comes with one charging board, but an additional charging board can be installed for even faster charging. The LBS 90 weighs 42 lbs, is 11x18.5x10”, and can weld studs with diameters ranging from 14 GA to 5/16”.

LBS 130 – As with the LBS 90, a second charging board can be installed in the LBS 130. While this CD stud welding unit is the same size as the LBS 90, it weighs 46 lbs. and has a capacitance charge of 132,000 mfd. The LBS 140 canweld studs with a diameter between 14 GA and 3/8” at a rate of up to 40 studs per minute.

Benefits of CD Stud Welders

CD stud welding has an extremely short weld time; the CD welding units discussed above have a welding time that averages between 1 and 3 milliseconds. CD stud welders allow for clean, quick welding of smaller diameter studs and fasteners to thin base metals.

The main advantages of these new CD stud welders are versatility and portability. All of these systems are compatible with both compact and gap weld guns. These lightweight, compact systems can also be easily transported from the shop to the field.

Powerful and portable CD welders, such as the LBS 40, LBS 75, LBS 90, and LBS 130, make stud welding a breeze. Call Sunbelt Stud Welding at 713-939-8903 to learn more about our line of capacitor discharge welders and other stud welding equipment.

Stud Welding Gun