Skip to main content
Sunbelt Stud Welding
1-800-462-9353
www.sunbeltstudwelding.com

Inverter Arc Stud Welder - IT 3002

Inverter Arc Stud Welder - IT 3002

Application

  • Especially suitable for thicker sheets of about .093 inches (2 mm) or higher
  • Especially suitable for welding of concrete anchors/shear connectors for job site applications
  • Suitable for through deck welding

Process Variants

  • Short cycle drawn arc welding
  • Drawn arc welding

Equipment

  • Welding with ceramic ferrule (series)
Mild steel
Stainless steel
Aluminium
M3 to M24 - #4 to 1"
Features
  • Microcontroller – for precise process times, optimal functional reliability and maximum operating convenience
  • Function monitoring – automatic function test following power-up; monitoring of all internal system functions
  • Lift test – for gap welding guns and stud welding heads
  • Library function – automatic specification of welding current and welding time through selection of stud diameter according to welding range (with and without shielded gas); fine adjustment via arrow keys
Advantages
Structure
  • Extremely easy to operate
  • Compact / Mobile – highly mobile thanks to compact dimensions and low weight (50% less weight compared to conventional stud welding units)
  • Robust – metal housing withstands rough treatment in shop and on site
Safety
  • With integrated mains filter (protection against voltage peaks)
  • Optimal for construction sites with large mains voltage fluctuations – use even with critical voltage supply ±10%
  • EMC test
  • High-voltage test with log
  • Retriggering lock-out – prevents welding on a welding element that has already been set
  • Thermal monitoring of transformer – automatic shutdown in case of overheating
  • Temperature-regulated ventilator – reduces noise and dust in the stud welding unit (greater reliability)
  • Control unit galvanically separated from welding lines – high degree of functional safety
  • Optimal protection against external interferences
  • Protection class IP 23
  • Also permits operation outdoors
Welding
  • Display – Infinitely adjustable power setting; easy monitoring of all functions via LED displays; easy operation via membrane keyboard and digital display; setting of welding parameters, programs, shielding gas (optional); digital display of current, welding and gas-preflow time; separate settings for welding current and welding time
  • Powerful – built-in power reserves
  • Trouble-free changing of welding voltage polarity possible by reconnecting welding current and ground cables
  • Outstanding welding quality – very high arc stability even at weak welding currents
  • High process flexibility – high clock frequency (30 kHz) of stud welding unit allows highly dynamic regulation of welding process
Technical Data
GasOption
Welding range#4 to 1”, diameter 14 ga to 1” (M3 to M24, diameter 2 to 25mm)
Welding materialMild steel, stainless steel, aluminum
Welding rateDiameter 1” = 6 studs/min (diameter 25 mm = 6 studs/min)
Through deck welding 3/4" = 12 studs/min (300 feet, AWG 4/0)
Industrial application 3/4” = 14 to 15 studs/min
Welding current2600 A (max.)
Current adjustment range300 to 2600 A (stepless)
Welding time5 to 1500 msec (stepless)
Primary power480/460 V, 3 phases, 50/60 Hz, 125 AT (alternative input voltages available)
Connected load150 KVA (with 400 V mains), 120 kw
Cooling typeF (temperature controlled cooling fan)
Protection classIP 23
Operation and storage conditionsAccording to current standards
Dimensions25.6” L x 22” W x 50.8” H (650 mm L x 560 mm W x 1290 H mm) without handle
Weight352.7 lbs (160 kg)
Suitable gunsSee below
Order number93-66-3211 (1 Gun connection)

Stud Welding Guns

Stud Welding Gun - A 12 with ceramic leg assembly PSC-1
A 12 with ceramic leg assembly PSC-1
M3 to M12 - #4 to 1/2"
  • Compact gun with easy set-up
  • Length compensation (stable welding results)
Stud Welding Gun - A 12 with gas shroud PSS-1/SC
A 12 with gas shroud PSS-1/SC
M3 to M8 (M10) - #4 to 5/16" (7/16")
  • Small gun with easy set-up for SC welding
  • Length compensation (stable welding results)
Stud Welding Gun - A 12 with shielding gas leg assembly PSS-2
A 12 with shielding gas leg assembly PSS-2
M3 to M12 - #4 to 1/2"
  • Compact gun with easy set-up
  • Length compensation (stable welding results)
Stud Welding Gun - A 12-FL
A 12-FL
M3 to M12 - #4 to 1/2"
  • Simple set-up of the gun without length compensation
Stud Welding Gun - A 16
A 16
Dia. 3 to 16 mm - dia. #4 to 5/8"
  • All-rounder for construction sites
  • Robust gun with plunge dampener and length compensation
  • Level on rear of gun to line studs level
Stud Welding Gun - A 22
A 22
Dia. 14 to 22 mm (25 mm) - dia. 9/16" to 7/8" (1")
  • Heavy duty gun for construction sites
  • Now with new leg guidance
  • Robust gun with plunge dampener and length compensation