Application

Features

Drawn arc with ceramic ferrule (ARC)
Drawn arc with shielding gas (ARC)
Short-cycle (SC)
Modern technology with extremely wide welding range
For welding with ceramic ferrules or with inert gas
Operating by membrane keyboard and display panel
Digital display of welding time in msec.
Inert gas module standard
Option automatic mode
Thermally controlled fan
Guided cooling air flow to the transformer to protect electronic components from being polluted
Emergency circuit to cut off the complete unit in case of defective power circuit
Integrated mains filter protects uniform voltage peaks and spikes
Galvanic separation of control and welding cables provide reliable operation
Sturdy metal housings; small dimensions and low weight
Depending on mains fuse, configuration also for 16 amps primary power supply possible

Mild steel

Stainless steel

M3 to M12 - #4 to 1/2"

SPECIFICATIONS
Welding range	M3 to M12 (type RD), dia. 2 to 10 mm #4 to 1/2" (type RD), dia. 14 ga to 3/8"
Welding rate	7 to 17 studs/min (depending on application and stud dia.)
Welding current	800 A
Welding time	5 to 1 000 ms (stepless)
Primary power	400 V, 3 phases, 50/60 Hz, 35 AT (slow blow) alternative primary power see, Order No.
Primary plug	32 A (at 400 V mains)
Connected load	I 1max = 31A
Cooling type	F (temperature controlled cooling fan)
IP code	IP 23
Dimension LxWxH (without handle)	470 x 230 x 220 mm 18.50" x 9.06" x 8.66"
Weight	40 kg / 88.185 lbs
Suitable guns	See below
Order number	93-10-0702A (400 V) 93-16-0702A (230/460 V) 93-15-0702A (575 V)